1 single-phase bridge rectifier glass passivated bridge rectifiers voltage range 50 to 1000 volts current 6.0 ampere features rating to 1000v prv. ideal for printed circuit board. reliable low cost construction utilizing molded plastic technique. the plastic material has ul flammability classification 94v-0. electrically isolated base-1500 volts. mechanical data polarity: symbols molded on body. weight: 0.15 ounces, 4.0 grams. mounting position: any. maximum ratings and electrical characteristics ratings at 25 ambient temperature unless otherwise specified , single phase, half wave, 60hz, resistive or inductive load. for capacitive load derate current by 20% parameter symbol kbj6005 kbj601 kbj602 kbj604 kbj606 KBJ608 kbj610 unit maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward(with heatsink note 2) rectified current @ t c =110 (without heatsink) i (av) 6.0 a peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 170 a maximum forward voltage at 3.0a dc v f 1.0 v maximum dc reverse current @t j =25 at rated dc blocking voltage @t j =125 i r 5.0 500 a i 2 t rating for fusing(t<8.3ms) i 2 t 120 a 2 s typical junction capacitance per element(note 1) c j 80 pf typical thermal resistance (note 2) r jc 1.5 /w operating temperature range t j -55 to +150 storage temperature range t stg -55 to +150 1- measured at 1.0m hz and applied reversed voltage of 4.0 vdc. 2- unit mounted on 75mm x 75mm x 1.6mm cu plate heatsink. kbj6005 thru kbj610 kbj website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 dimensions in inches and (millimeters)
2 ratings and characteristic curves note: specifications are subject to change without notice. website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 kbj6005 thru kbj610
|
